- Brushless pump, permanent magnetic rotor, maintenance-free.
- Enameled wire coil and circuit board are sealed by epoxy resin.
- The coil adopts pure copper enameled wire, lower temperature rise and longer life span.
- Amphibious pump, you can use it in the water or out of water (follow the installation instruction).
- IP68 waterproof grade, totally submersible in the water.
- Detachable design, providing convenience for cleaning work.
- With a filter, avoiding blocking the inlet.
- 4 rubber suckers on the bottom, can adsorb on the smooth surface and reduce noise and vibration.
- Small size, high efficiency, low noise (less than 35db).
- Suitable for aquarium, fountain, car cooling, computer water cooling system and circulation systems.
- Color: Black
- Pump material: PC + ABS
- Rated Voltage: DC 12V
- Max. Power: 5W
- Max. Current: 416mA
- Max. Flow Quantity: 280L/H
- Max. Lift: 300cm / 9.84ft
- Noise: Less than 35dB
- Outer Diameter. of Inlet/Outlet: 8.5mm / 0.33in
- Inner Diameter. of Inlet/Outlet: 6mm / 0.24in
- Waterproof Class: IP68
- Max. Liquid Temperature: 60°C
- Cable Length: 100cm / 39.4in
- Product Size: 59.5x49x42.5mm / 2.34×1.93×1.67in
- Product Weight: 71g / 2.5oz
- Package Size: 6.9×5.5x6cm / 2.72×2.17×2.36in
- Package Weight: 83g / 2.93oz
- 1 x DC12V Brushless Pump
- 1 x Filter
- 1 x User Manual (English)
- Please check the voltage and power of the pump power before power on.
- Please cut off the power before you install/put in/take away the pump from the water; otherwise, the pump can’t outlet water due to the air in it.
- It can be used in the water or other liquids (without particles and impurities); NOT for viscous and acid-base liquids.
- DO NOT dry burn the pump, otherwise it would be damaged.
- Switch on-off the power repeatedly for several times to eliminate the air in the pump impeller and the pipe.